Tuesday, February 23, 2016

Tips Improve Mobile Speaker Dead

Tips Improve Mobile Speaker Dead
I will share tips to you regarding one type of damage that might be considered mild on your mobile phone. Actually, we rarely found mild damage to the phone such as speakers die. This case is very light and easy to overcome, but if users do not understand the issue of mobile phone then this problem would be a very serious problem.
Speakers who die are often caused by falls, hit by hard objects or due to exposure to water. Signs are often posed is: The sound produced on a speaker phone is sounded small. Upon receiving a call, you can not hear the caller's voice, so this problem would be troublesome if it occurs at an inconvenient time.

Before doing repairs to dismantle parts of the phone beforehand you can check your speakers in a way: Open the menu in the pound of cells, select the menu settings or set up. Check the volume on your phone, possibly before the volume is turned off so that no noise is generated. On the phone open a new type of profile and activate the profile menu general / general and press the select button, then go to personalize and maximize volume. Make sure that the ON / OFF button volumes in good condition.

If not successful, it must be repaired demolition by: Open cashing cover mobile phones, mobile phone parts separately After all, look at the top of the phone. In that section there is a ring-shaped component, usually black and has two legs connector that has the function to connect the speakerphone with the phone. When the phone has long been used then the passage is usually dirty with dust or rust that causes speeakernya dead. Clean the point the speaker connector on the PCB with a rubber eraser or a cutter by rubbing in the same direction and make sure not be allowed to damage the connector part that connects with mobile phones. Pull the foot connector speaker slightly upward slowly - the land should not be loose or broken it to the feet connectors properly - properly attached to the phone perfectly on the machine so that the current flows perfectly and sound on the speakers back out.

However, if the condition of the speakers are switched off, it must be replaced with a new speaker components. To check the speaker use multitester life or death. Similarly, the tips that I can share with you all may be useful.

0 komentar:

Post a Comment